Having your boat coated with a thick and heavy-duty layer of Gator Glide or Wetlander makes it slide better, prevents friction, and lets you enjoy the smoothest water operations.
However, these two brands may confuse you when it comes to choosing the best of them. Don’t worry; I am here to give you the best analysis between Wetlander and Gator Glide.
Gator Glide is highly famous and has been in the industry for more years than Wetlander. That’s why the boat keepers recommend this adhesion coating beneath your boats.
The Gator Glide also seems cheaper than the newly introduced Wetlander boat bottom coating. Besides, GG has better customer service, and it takes almost 30 minutes since you are ready for the second coat of this brand’s adhesion.
A Brief Comparison Table
| Descriptive Factors | Wetlander | Gator Glide |
| Durability and Leakage Protection | Standard | Excellently better |
| Costs With Either Boat Bottom coating | Expensive | Cheaper |
| Application Upon | Adhesion for aluminum and fiberglass or wood | The same goes for this fiberglass and aluminum or wood |
| Customer Service From Each Brand | Not that highly discussed | People are very pleased |
| Friction on the bottom side | Lower | Greatly Lower |
| Dry Timing | It takes up to 24 hours to try | It takes almost 20 to 30 minutes to dry |
| Which one is Recommended By Boaters? | Not that highly recommended and used | Highly used and recommended |
Key Differences Between Wetlander And Gator Glide
- Durability and Leakage Protection
I’ve seen many boaters claiming that the Gator Glide boat bottom protection coating provides more protection against leaking and leaves a better and thick finish.
But Wetlander is also not a bad option.
However, it may not perform as well as the Gator Glide does in providing these features or facilities.
- Costs With Either Boat Bottom coating
Another reasonable difference between the prices of these two adhesions from both brands can be found.
From the research, I’ve seen people stating Gator Glide is a cheaper coating for boats than Wetlander.
However, this price difference is not that huge. It might be due to the location or availability of the product. Both are not that expensive to buy and apply on the bottom side of your boats.
Also Read: Differences Between Gator Glide And Frog Spit Coating.
- Application Upon
There is no problem if your boat is made of Aluminum, Fiberglass, or Wood. That’s because these adhesions or coatings can easily be applied to all these materials.
They grab the coating and give a new as well as protective look to the bottom of a boat.
After that, you can go hunting, make lodging, land the boat on a stand easier, and much more.
- Customer Service From Each Brand
Not so many people have experienced buying this coating layer from Wetlander. That’s why we cannot guess what this brand’s customer service would be.
But since I’ve explored the internet, people are happier with how Gator Glide responds, answers questions, and solves problems related to your boat. That’s why GG has better and more amazing customer service.
- Friction on the bottom side
Another reason for applying this coating layer of paint at the bottom of the boats is to make them observe less friction and provide better sliding.
Such features can be seen at a higher level with the Gator Glide Bottom protection coating layer.
In contrast, Wetlander is also good at providing these features to the boat keepers. But their coating layer is not as durable or productive as the Gator Glide provides.
- Dry Timing
Sometimes, you might have to go for the second coat if the first one is not that thick. In that case, you’d wait for the first coating to dry.
But there is a difference between the dry timing of both brands’ coating layers. It takes up to 24 hours for the Wetlander to dry.
Still, with Gator Glide, you can easily go for the second coat in almost 20 to 30 minutes. That’s why the Gator Glide seems a better product.
- Which one is Recommended By Boaters?
Always consider asking the expert boat keepers who do daily fishing or hunting in the water before buying a product like this.
For example, you can see the Gator Glide boat bottom coating is much loved and recommended by many boat keepers.
They have applied this coating and seem very happy with it.
But where they have these appealing feelings for the Gator Glide, some haven’t even heard of Wetlander.
But let me tell you, Wetlander has been in the industry for the past 15 years, which is not as high as Gator Glide.
Still, it’s a good brand to consider that comes right after the Gator Glide.
They sell quality adhesion or paint to cover the bottom of your Aluminum, Fiberglass, or wooden constructed boats.
Which One Should Give A Shot For Your Boat?
It’s completely fine to give this newly branded Wetlander boat bottom coating layer a try and check if it matches your desires. The results are not that bad, and a good number of customers seem happier with them.
But if you have seen the internet, people are talking a lot about Gator Glide. So, in my view, you must not alter your decision as you might end up with something unsuitable for your boat.
Hence, Gator Glide is your best option when you paint the bottom of your own boat.
Also Read: Differences Between StarBoard And HDPE.
Frequently Asked Questions (FAQ)
By preventing friction, Gator Glide adds more speed to your boat.
It works pretty well when applied on the bottom of the boat.
G2 is almost 10% slicker, and G4 is almost 10% more abrasion resistant. You can use the G2 for mud and outboard boats, whereas the G4 for the airboats that do not run much.
No, it doesn’t leak!
Verdict
Coming to conclusion, my vote would also be with the Gator Glide when you compare the Wetlander with Gator Glide. It’s because I do have a good experience with my boat, and the coating I applied is still working. So, I would recommend the same to you.
However, if you have bought the Wetlander recently and used it for the bottom of your boat, let me know your experience. I would love to share the information with others!
