You can get many lifts for your fleet of cars, but take my word, Challenger CL10V3 is killing it! You know what? Scratch that; you don’t have to believe me just yet. Read till the end, and you’ll be singing the same song.
Now, this spectacular lift has innovative technology and over-the-top features to allow you to service the most extensive range of vehicles efficiently. And that’s just the beginning.
So, let’s get started!
Features of Challenger CL10V3
Spoiler alert! In the field of lifts, no company battles out the title of excellence more than the Challenger CL10V3. You’ll be amazed by all the intriguing and remarkable aspects that it bears, all of which make it a one-in-a-million lift and utterly unstoppable.
- Exclusionary Versymmetric Technology
My favorite perk about using the Challenger CL10V3 was its exclusive built-in Versymmetric technology.
This feature allows you to carefully lift all vehicles symmetrically and asymmetrically within a specified capacity.
And that’s not all. This automation allows you to service many cars while maximizing the bottom line.
- Paired Telescoping Screw Pads
The Challenger CL10V3 has premium double screw pads for telescoping, which you can easily adjust to different heights. Because of the frame lips, the need for adapters is minimal.
What’s more, the pads offer you extensive vertical control when working with a BendPak 9,000 and 10,000lb. You can screw the cushion up and down to create a level lifting in multiple conditions.
Also Read: Alternatives To QuickJack Car Lift.
- One-point Mechanical Lock Release
A combination of a single-point mechanical lock release with a coated sheath and clutch bar prevents the wiring from stretching by dividing the column locks simultaneously. This application ensures a smoother and easier operation.
With this technique, you detach the lock and then press the down switch on the control panel until the vehicle is pulled down.
- Heavy Duty Pulley and Cable Stabilization Technique
Heavy vehicles can be easily lifted through the oversized pulley and the equalization of the cable while reducing the strain on the balancing system.
Also, the longevity of the cable is increased. This means you can use it long without spending money on new lines.
- Overhead Shut-off System
The Challenger CL10V3 contains a padded overhead shut-off structure that protects the vehicle from damage by preventing it from being lifted too high. This automated system in the lift minimizes any risk of vehicle destruction by ensuring it is raised to the right level.
- Flexible Arm Control Shafts
One more outstanding feature of the Challenger CL10V3 is the adjustable arm control shafts. Why are they significant? The arm restraints are plated and work together with the arm pins to prevent corrosion, increasing durability.
Adjustability is crucial in a lift as it ensures that the arms are not shifted or moved when a vehicle is already set and raised.
- Rubber Door Guards
Another major and significant feature that I couldn’t afford to leave behind is the presence of rubber door guards. The guards are standard and well-integrated to ensure extensive protection of the vehicle’s doors.
You don’t have to worry about any damage occurring. I bet the Challenger CL10V3 has already won your heart as it did mine.
- Extended Carriage
Can you imagine that the Challenger CL10V3 also has a 48-inch elongated carriage? I know, right? I also couldn’t believe it at first. It was just too good to be true.
This incredible lift has an extended conveyance that reduces the load bearing, increasing the machine’s lifespan. Here is a little demo of this car lift for you.
- Conventional Power Controls
Challenger CL10V3 comes with power controls as well that promote high efficiency. On top of that, the controls increase the reliability of the lift with minimum maintenance.
Interestingly, the dual power controls can be customized to your preference. I mean, who doesn’t like that much freedom?
- Fully Aggregated Plate Design
As if that’s not enough, the Challenger CL10V3 has a gusseted plate structure that expands the pole’s rigidity and lowers deflection.
Gusseted plates pave a quick and efficient way to support heavy loads by creating adequate stability.
What Improvements Could Be Made To Challenger CL10V3?
Nothing is perfect; there is always room for improvement. The Challenger CL10V3 is exceptional in so many ways.
However, there are a few factors that could be looked into. Here are some of the downsides and rectifications that can be made to this appliance:
- Lower Cost
The Challenger CL10V3 goes for as high as $12,020, which can be a little pricey for most people. Yes, the lift is magnificent.
But if the manufacturers could cut down on the prices, it would be awesome as more people would have a taste of the cake.
- Flattening of Columns
One major challenge I observed while installing my Challenger CL10V3 was that the columns were not flat enough. This creates a problem while handling a large load.
You have to carry out a bit of rock and roll to position the columns the way you want, which can be pretty cumbersome. Ensuring the columns are flat enough will eradicate this inconvenience.
Also Read: Differences Between Hooklift And Switch-N-Go.
Frequently Asked Questions (FAQ)
Challenger lifts are manufactured in Louisville, Kentucky, ranging from 6,000lbs to 148,000 lbs.
A rotary car lift is a machine that adopts two steel columns to rotate 360 degrees with the vehicle raised using hydraulics.
Snap-on acquired Challenger for $38 million and is expected to widen motor repair amenities.
Indeed! All Challenger lifts are fully certified. What’s more, these machines are a part of the Automotive Lift Institute.
Wrapping Up
There goes my honest and detailed Challenger CL10V3 review. Overall, this lift is impeccable. I don’t regret spending money on it. It was all worth it!
With the comprehensive information I have put across, I’m sure you now understand all the hype regarding this equipment.
You can compare it to other lifts and decide which tickles your pickle the most. But I assure you the Challenger lift will be one of the best decisions you have ever made. Ask me later!
