PrimeWeld TIG225X has made its mark on the market and has long achieved the title of one of the best welders out there.
It is without a doubt true that this company has brought forth an exceptional product that is especially great if you’re a beginner.
But whether you’re a beginner or not, it is important to know that even this great work of magnificence comes with its drawbacks. We’ve got your back! This article will guide you through them.
Issues With the PrimeWeld TIG225X Welder
Let’s be transparent, based on the reviews and experiences, the PrimeWeld TIG225X is an exceptional welder with excellent performance. You could say it’s top-notch, so saying that it has major problems is a stretch.
The more you know the better. So, without further ado let’s get into it so you can know what you might have to tackle.
- No Display Issue
The device comes with several features that come with respective settings set at default.
For whatever reason, depending on the work you carry out, it is bound to happen that you’ll need to re-adjust those settings at your convenience.
This device unfortunately does not come with any attached color display nor any screen that would help to work out these settings and obtain the required parameters.
- One Digital Display for The Amps
The absence of displays stretches a bit further than what you’ve just read.
However, this feature does not particularly refer to the absence of displays overall but the fact that there aren’t enough displays for everything else that needs to be done.
There’s a digital display of course, but there is just one digital display working for all the amps.
Every other setting is adjusted with the help of a knob. This gets the work done but it can easily make things quite confusing.
It would take some practice and get used to for this to get less confusing.
Also Read: Problems With Vulcan MigMax 215 Welder.
- Practice Is Needed to Determine the Best Settings
This point is self-explanatory given the first 2 issues discussed by the welder.
We’ve established the fact that the lack of a display makes adjusting the settings kind of a hassle. Therefore, to set the needed parameter by changing the default settings to the best one for our work at hand, the knobs need to be adjusted often.
As mentioned before, this can be challenging and will need several tries to get used to it. You’ll need to go through a few practice sessions to familiarize yourself with adjustments to the knobs.
Of course, after that the work becomes easy, but wouldn’t it be better to have it the easy way where the settings can be altered more conveniently?
- Fans Are Leaned on the Loud Side
The fans are not exceptionally loud but if there was a side to pick, the fans on the PrimeWeld TIG225X leaned on the loud side of the spectrum.
With that being said, there is certainly room for improvement to manufacture this to reduce loud noise from fans.
- There Is No MIG
MIG is short for ‘metal inert gas.
Here’s how it works. The feed wires are simply used through a spool gun for the welding to begin.
MIG welding is done with the use of consumable filler wires.
MIG welding is a great step to start out with if you’re an amateur/inexperienced welder who is just learning how to weld.
Learning this is a great first choice if you’re stepping into welding. This is mainly because it is super easy to operate a MIG welding torch without much prior skill. Furthermore, the procedure is easily automated.
The PrimeWeld TIG225X is of course great as praised before, but the lack of a MIG kind of puts it out there that there is a little something missing.
For instance, the presence of a MIG offers greater speeds for welding and greater rates of deposition.
MIG welding is also cleaner by comparison! Since there would be no slag to chip off the weld means there would be a less post-welding mess to clean up.
In most cases, you wouldn’t even require any fluxes.
- Foot Pedal Could Have Been Better
This is quite minor and hardly noticeable. Based on your preference, you might be one of those people who would find the foot pedal to be a little uncomfortable to get used to.
This is very minor though and the chances of this being a problem for anyone are too rare to happen.
- It Might Take A Few Attempts to Get It to Start Working
Okay, so a few tries to reach the desired setting is not the only thing in this welder that requires more than one attempt.
Getting this gear started is likely to take a few tries.
So, once you get your welder, don’t be quick to lose hope and get disheartened thinking the product is faulty.
It’s easy to assume so and demand a refund.
Just keep in mind that it will take a few attempts for it to function.
- The Large Sum of Knobs Can Get Confusing
The fact that there are several knobs makes it confusing. There are quite a several knobs and as mentioned earlier you’ll just have to get used to it.
Also Read: Issues With Miller Multimatic 220 Welder.
Frequently Asked Questions (FAQ
You might still have certain questions even with this knowledge. So, to clear things up even further we will cover certain frequently asked questions.
PrimeWeld is owned by Prime Click LLC. More specifically said, it is PRIMEWELD Trademark of Prime Click LLC.
Yes, PrimseWeld is in fact made in the USA. The franchise is based in the US, but the same cannot be said about the manufacture of their machinery.
PrimeWeld, the US-based company gets their manufacturing done from China.
There can be a list of reasons due to which your TIG welder is not working. It includes the following: the tungsten could be touching or melting into the weld puddle, insufficient gas flow, incorrect balance control, wrong polarity of the electrode, no shielding gas, improper gas flow, open weld circuit, etc.
Conclusion
Bottom line, knowing the PrimeWeld TIG225X problems will guide you to use this with more ease and keep you aware of what challenges you could possibly face.
But as stated before, these issues have not been marked significant enough to be of issue to this product. This is nonetheless a remarkable welder.
