A significant difference between these two-metal marking spray product manufacturing brands is that Enduramark is a newly launched brand. In contrast, CerMark has been here for a long while.
CerMark is expensive and incurs more per square, whereas Enduramark is cheaper. However, both can be cleaned quickly and shows different performances on different types of metals.
Let’s dig into these brands and find out how a specific one differs.
A Brief Comparison Table
| Factors To Consider | Enduramark Metal Marking Spray | CerMark Metal Marking Spray |
| Performance | Low on all metals, including Stainless Steel, Brass, Aluminum, Copper | High on all metals, including Stainless Steel, Brass, Aluminum, Copper |
| Brands Recognition | Newly Launched | Older, Venerable |
| Spray Quality | Good | Better |
| Cost Per Square | $0.03 | $0.04 |
| Durability After Laser | Excellent | Excellent |
| Darkness | Not better | Great |
| Clean Up | Easy by using water or rubbing the surface | Easier to use water or rub the surface |
Detailed Differences Between Enduramark And Cermark Metal Marking Sprays
- Performance
You should always test a metal marking spray’s performance and how it will appear on that respective metal.
Whether it is brass, Aluminum, Copper, or Stainless steel, that spray must leave good marks that can be easily read and visible more clearly.
In that case, one can always rely on a lesser marking spray from Cermark because it shows the best results on different metals.
A test was performed, and that left the Cermark metal marking spray of the highest quality.
Except for Enduramark, Cermark LMM6000 metal marking spray works great on stainless steel and brass.
But I am afraid you may not find this one working better on Copper and Aluminum.
However, the performance of Enduramark on each metal is average. This spray cannot get exceptional results if your expectations are higher.
Also Read: Alternatives To CerMark.
- Brands Recognition
People are more known to Cermark because it has acquired Thermark (another similar product manufacturing brand) and has been in the business for a long time.
However, you will find Enduramark, a newly launched spray brand that makes less expensive products.
Besides, that cost comes at a performance loss, but it is still better for most buyers.
- Spray Quality
You can judge sprays from both brands on the quality they would be willing to provide otherwise.
Expectations should always be higher with Cermark, and you are comparing it with Enduramark.
That’s because, being a venerable brand in the market, it doesn’t leave you not providing value for money.
On the other hand, whenever you are considering Enduramark, you may not get what you expected.
That, though, seems adequate for the pricing point. On top of that, these sprays do not come in Aerosol cans.
- Cost Per Square
We sometimes say that you have to spend more if you want to achieve high quality in anything.
And it seems to be true in our case when we are comparing the Enduramark and Cermark metal marking sprays.
When a manufacturer or printer uses the Spray from Cermak, it will charge him $0.04 per square, slightly higher than Enduramark.
Because with the second brand, this cost comes at 0.03 per square. So, you can save here but not with Cermark.
- Durability After Laser
Well, it will be perfectly suitable to say that both products or brands give you the same durability of laser printing on metal.
When a metal is placed under a laser to print something using these sprays, it will leave the desired printable marks.
And these marks or printing information will not erase unless you do it yourself. Therefore, we can say that on the durability side, both seem to be equal.
- Darkness
Most people say about the print; the darker it is, the better. You also consider choosing a metal spray brand that leaves darker marks at that time.
So, when you must choose between Enduramark and Cermark, the latter comes as a priority.
Cermark leaves better dark marks on metal than Enduramark does. These printing details are more visible and readable to most readers.
- Clean Up
Feel free to clean the details printed with both metal marking sprays because both can be removed by water or by rubbing metal sheets with alcohol or soap.
Therefore, there is no problem that you will face in cleaning these sprays. Just use a piece of cloth in a little rugged way and keep cleaning what is required.
Which Metal Marking Spray Is Better?
I recommend you use the Cermark Metal marking spray and the LMM6000 model.
It will be best to use on most metals, will leave darker prints, and tends to provide a better spray quality. However, it could be costly sometimes. But I can ensure that the price would be worth the cost.
Also Read: Differences Between Epilog And Trotec Laser Cutter.
Frequently Asked Questions (FAQ)
If you ever have time to experiment, consider using the Kapton Tape on a tool and engraving. It will stand out better and show consistent, cheaper results than Cermark.
It will only work if the laser is a Continuous Wave laser system. It won’t be effective with the Pulse system.
Yes, Cermark leaves better results on brass than the Enduramark spray.
It’s pretty easy using a Laserbond because you have to apply it on a broken or damaged surface and then use the laser to fix that part.
Conclusion
Where Enduramark metal marking spray is good, the Cermark is exceptionally good. But the most extensive comparison between Enduramark and Cermark is the price you will pay for these metal marking sprays.
My recommendations would still be the same, and I would not like you to use an inferior product that doesn’t provide you value on your daily workloads. Be sure of that!
